Rigby Highland Stalker 275

Post Reply
rem600
Posts: 27
Joined: Tue Oct 19, 2010 10:59 am
Location: Northern Minnesota
Location: Northern Minnesota

Rigby Highland Stalker 275

Post by rem600 » Fri Feb 23, 2018 5:53 pm

Folks,

The past 3 days I have been trying to purchase the above rifle at EuroOptics? I have made numerous purchases with Alex and Jason that went along without a hitch? It seems now Alex has some people that aren’t familiar with the products they sell answering the phones?
All I was asking was 3 day shipping and if they had the scope mounts for this rifle? The first person said they did not sell Rigby rifles? I then asked to speak to someone else and was told no chance on scope mounts?
I then asked to talk with Alex who was busy but they would have him call me back? Well that didn’t happen so I sent EuroOptic an email asking to talk with Alex or Jason ? Still nothing.
I know some of you folks deal a lot with Alex do you know how I may get a hold of him directly?

Thank You
Pete



User avatar
Chamois71
Posts: 198
Joined: Sun Jan 24, 2016 8:43 am
Location: Pennsylvania-USA

Re: Rigby Highland Stalker 275

Post by Chamois71 » Fri Feb 23, 2018 11:05 pm

Pete

I’ve always had very good service speaking with Keefer Wetzler...I’d call back and ask to speak to him. He’s been my primary point of contact and has not disappointed me at all.

Best
Scott
"That if you properly respect what you are after, and shoot it cleanly and on the animal’s terrain, if you imprison in your mind all the wonder of the day from sky to smell to breeze to flowers—then you have not merely killed an animal. You have lent immortality to a beast you have killed because you loved him and wanted him forever so that you could always recapture the day." —R.Ruark

rem600
Posts: 27
Joined: Tue Oct 19, 2010 10:59 am
Location: Northern Minnesota
Location: Northern Minnesota

Re: Rigby Highland Stalker 275

Post by rem600 » Sat Feb 24, 2018 12:15 pm

Scott,

Thanks for the tip. All taken care of.

Regards
Pete

Rod
Meister der jagd
Posts: 562
Joined: Wed May 21, 2014 1:01 am
Location: Brisbane qld
Location: Queensland, AUSTRALIA

Re: Rigby Highland Stalker 275

Post by Rod » Sat Feb 24, 2018 5:15 pm

rem600 wrote:Scott,

Thanks for the tip. All taken care of.

Regards
Pete
Good to hear. When you decide on a scope mount any chance of posting and letting us know what you got ?

cheers
Rod

User avatar
Gun Barrel Ecologist
Moderator
Posts: 4635
Joined: Sun Aug 23, 2009 12:54 pm
Location: Queensland Australia

Re: Rigby Highland Stalker 275

Post by Gun Barrel Ecologist » Sun Feb 25, 2018 2:54 am

Rod wrote:
rem600 wrote:Scott,

Thanks for the tip. All taken care of.

Regards
Pete
Good to hear. When you decide on a scope mount any chance of posting and letting us know what you got ?

cheers
Rod
Had a shot this afternoon of a .30'06 with the Mauser Hexalock mounts - very nice bit of kit :D :drool:

rem600
Posts: 27
Joined: Tue Oct 19, 2010 10:59 am
Location: Northern Minnesota
Location: Northern Minnesota

Re: Rigby Highland Stalker 275

Post by rem600 » Sun Feb 25, 2018 8:12 am

Rod,

With the scope removed are the bases low enough to allow the usage of the sights?

Thank You Sir
Pete

Rod
Meister der jagd
Posts: 562
Joined: Wed May 21, 2014 1:01 am
Location: Brisbane qld
Location: Queensland, AUSTRALIA

Re: Rigby Highland Stalker 275

Post by Rod » Sun Feb 25, 2018 8:26 am

rem600 wrote:Rod,

With the scope removed are the bases low enough to allow the usage of the sights?

Thank You Sir
Pete
Yes they are Pete. I've got a Highland Stalker in 30/06, haven't bought a mount yet but will probably go with the this one:

301-00098 EAW complete pivot mount for Mauser K98 without bulb,
with rings dia. 1”/26 mm, height: 15 mm

I have had a look at another rifle with that base fitted and the iron sights were well above the bases. Have also seen another Rigby with the Mauser style mount and they also allowed use of the iron sights.

They are nice rifles.

cheers
Rod

Rod
Meister der jagd
Posts: 562
Joined: Wed May 21, 2014 1:01 am
Location: Brisbane qld
Location: Queensland, AUSTRALIA

Re: Rigby Highland Stalker 275

Post by Rod » Sun Feb 25, 2018 8:28 am

Gun Barrel Ecologist wrote:
Rod wrote:
rem600 wrote:Scott,

Thanks for the tip. All taken care of.

Regards
Pete
Good to hear. When you decide on a scope mount any chance of posting and letting us know what you got ?

cheers
Rod
Had a shot this afternoon of a .30'06 with the Mauser Hexalock mounts - very nice bit of kit :D :drool:
Yeah they are nice rifles. What scope did it have fitted ?

Rod

rem600
Posts: 27
Joined: Tue Oct 19, 2010 10:59 am
Location: Northern Minnesota
Location: Northern Minnesota

Re: Rigby Highland Stalker 275

Post by rem600 » Sun Feb 25, 2018 8:39 am

I have 3 S&B 4x to choose from? One of them has a 26mm tube which is of course the one I prefer with the crosshairs it is fitted with?

Rod
Meister der jagd
Posts: 562
Joined: Wed May 21, 2014 1:01 am
Location: Brisbane qld
Location: Queensland, AUSTRALIA

Re: Rigby Highland Stalker 275

Post by Rod » Sun Feb 25, 2018 8:49 am

rem600 wrote:I have 3 S&B 4x to choose from? One of them has a 26mm tube which is of course the one I prefer with the crosshairs it is fitted with?
Sir, you have great taste in optics too. I also have a 4x S&B sitting here waiting to put on her.

Rod

User avatar
Gun Barrel Ecologist
Moderator
Posts: 4635
Joined: Sun Aug 23, 2009 12:54 pm
Location: Queensland Australia

Re: Rigby Highland Stalker 275

Post by Gun Barrel Ecologist » Sun Feb 25, 2018 2:49 pm

3-10x42 Z3 Swarovski which from memory weigh about 350g and kept the weight down in the hands so to speak

Rod
Meister der jagd
Posts: 562
Joined: Wed May 21, 2014 1:01 am
Location: Brisbane qld
Location: Queensland, AUSTRALIA

Re: Rigby Highland Stalker 275

Post by Rod » Sun Feb 25, 2018 9:52 pm

Gun Barrel Ecologist wrote:3-10x42 Z3 Swarovski which from memory weigh about 350g and kept the weight down in the hands so to speak
Yep, light, 1" tube is the way to go I reckon. If I didn't have a 4x sitting at home it would have been either the 2-7 Kahles or the 3-9 Z3.

Cheers
Rod

Post Reply

Return to “John Rigby And Company”