How to Install the Krieghoff Rimfire Einstecklauf into a Drilling

Sponsored by Luxus Arms.

Moderators: Gun Barrel Ecologist, Dom, mchughcb, pagosawingnut

Post Reply
User avatar
mchughcb
Moderator
Posts: 10498
kuchnie na wymiar kraków nowoczesnekuchnie
Joined: Tue Aug 25, 2009 2:55 am
Location: Melbourne Australia

How to Install the Krieghoff Rimfire Einstecklauf into a Drilling

Post by mchughcb »

I have been meaning to do this for some time. I don't use the 22 Mag barrel much these days but it still shoots straight.
Hidden Content
This board requires you to be registered and logged-in to view hidden content.



User avatar
SPEEDY
Moderator
Posts: 9935
Joined: Wed Jul 08, 2009 7:50 am
Location: Southern highland- Australia
Location: Albury, NSW, Australia

Re: How to Install the Krieghoff Rimfire Einstecklauf into a Drilling

Post by SPEEDY »

I'd love one of those in 22lr, no need for it but they are cool.
I'm soft and I don't care. :dance:

User avatar
deerhunter338mag
Global Moderator
Posts: 9090
Joined: Fri Jun 12, 2009 12:50 am
Location: Australia
Location: Melbourne Australia

Re: How to Install the Krieghoff Rimfire Einstecklauf into a Drilling

Post by deerhunter338mag »

So you will be selling your R93 22 barrel then Chucky. :pray: :lol: :lol: :lol:
Measure it, when it’s on the deck

User avatar
mchughcb
Moderator
Posts: 10498
Joined: Tue Aug 25, 2009 2:55 am
Location: Melbourne Australia

Re: How to Install the Krieghoff Rimfire Einstecklauf into a Drilling

Post by mchughcb »

Good question. It slips nicely into the BBF97 too. When lockdown finishes i might take it to the range and see how it performs in a bergstutzen configuration.

User avatar
SPEEDY
Moderator
Posts: 9935
Joined: Wed Jul 08, 2009 7:50 am
Location: Southern highland- Australia
Location: Albury, NSW, Australia

Re: How to Install the Krieghoff Rimfire Einstecklauf into a Drilling

Post by SPEEDY »

Very versatile stalking rifle that way.
I'm soft and I don't care. :dance:

User avatar
mchughcb
Moderator
Posts: 10498
Joined: Tue Aug 25, 2009 2:55 am
Location: Melbourne Australia

Re: How to Install the Krieghoff Rimfire Einstecklauf into a Drilling

Post by mchughcb »

Also good if you need to pop a cap in the ass of something.

User avatar
sav338
Meister der jagd
Posts: 2335
Joined: Fri May 03, 2013 6:25 am
Location: Australia
Location: Melbourne

Re: How to Install the Krieghoff Rimfire Einstecklauf into a Drilling

Post by sav338 »

mchughcb wrote:
Sat Oct 17, 2020 5:52 am
Also good if you need to pop a cap in the ass of something.
Something or someone :doh: :lol:

User avatar
mchughcb
Moderator
Posts: 10498
Joined: Tue Aug 25, 2009 2:55 am
Location: Melbourne Australia

Re: How to Install the Krieghoff Rimfire Einstecklauf into a Drilling

Post by mchughcb »

:lol: 8-)

secondtry
Meister der jagd
Posts: 1959
Joined: Fri Nov 23, 2012 8:22 pm
Location: Victoria Australia

Re: How to Install the Krieghoff Rimfire Einstecklauf into a Drilling

Post by secondtry »

That's a very elegant solution to a problem that I don't have. :D

I recall reading an article somewhere about a European who had one for his BBF. The groups were stupid tiny and he had the thing printing pretty much right on top of his rifle barrel groups.

22 mag is a great choice. Much better than 22LR, although I think I would prefer a Hornet to either of the RFs.

User avatar
mchughcb
Moderator
Posts: 10498
Joined: Tue Aug 25, 2009 2:55 am
Location: Melbourne Australia

Re: How to Install the Krieghoff Rimfire Einstecklauf into a Drilling

Post by mchughcb »

The rimfire version is easier to install, or remove than the centrefire.

User avatar
SPEEDY
Moderator
Posts: 9935
Joined: Wed Jul 08, 2009 7:50 am
Location: Southern highland- Australia
Location: Albury, NSW, Australia

Re: How to Install the Krieghoff Rimfire Einstecklauf into a Drilling

Post by SPEEDY »

secondtry wrote:
Tue Oct 20, 2020 4:17 pm
That's a very elegant solution to a problem that I don't have. :D

I recall reading an article somewhere about a European who had one for his BBF. The groups were stupid tiny and he had the thing printing pretty much right on top of his rifle barrel groups.

22 mag is a great choice. Much better than 22LR, although I think I would prefer a Hornet to either of the RFs.
I'd go the 22lr, perfect for small game and putting down wounded game, and for anything bigger then that's why you have the actual rifle barrel.
I'm soft and I don't care. :dance:

User avatar
mchughcb
Moderator
Posts: 10498
Joined: Tue Aug 25, 2009 2:55 am
Location: Melbourne Australia

Re: How to Install the Krieghoff Rimfire Einstecklauf into a Drilling

Post by mchughcb »

I got some packets of 22 mag subs which gives it 22 lr power. Need more? Then you have 2200fps 30gr vmax.

User avatar
SPEEDY
Moderator
Posts: 9935
Joined: Wed Jul 08, 2009 7:50 am
Location: Southern highland- Australia
Location: Albury, NSW, Australia

Re: How to Install the Krieghoff Rimfire Einstecklauf into a Drilling

Post by SPEEDY »

That could work too, quite well I'd say.
I'm soft and I don't care. :dance:

secondtry
Meister der jagd
Posts: 1959
Joined: Fri Nov 23, 2012 8:22 pm
Location: Victoria Australia

Re: How to Install the Krieghoff Rimfire Einstecklauf into a Drilling

Post by secondtry »

mchughcb wrote:
Tue Oct 20, 2020 10:27 pm
I got some packets of 22 mag subs which gives it 22 lr power. Need more? Then you have 2200fps 30gr vmax.
And the really big plus with 22Mag - NO RELOADING. :D :D :D

Arcturus
Posts: 38
Joined: Fri Feb 26, 2010 11:07 am
Location: Midland Texas

Re: How to Install the Krieghoff Rimfire Einstecklauf into a Drilling

Post by Arcturus »

Good video. Thanks. I have an Einstecklauf (not sure what manufacturer it is right now) in .22 Hornet for my Heym drilling, but haven't had it fitted yet and wasn't sure exactly what needed doing.

Post Reply

Return to “Drillings, Combinations, Doubles and Singles”