Blaser k95 straight stock ordered
Moderators: Gun Barrel Ecologist, Dom, mchughcb, pagosawingnut
- O4ak95
- Posts: 381
- Joined: Thu Mar 24, 2016 9:04 pm
- Location: New Zealand
Re: Blaser k95 straight stock ordered
No worries Darryl, your welcome to try it for fit. I'm assuming your in the South Island? Give Joel a call at Stager and see if you can organise a fondle of it before he sends it up to me. Pretty sure it will be here in June.
Tim
Tim
-
- Posts: 7
- Joined: Mon Mar 28, 2016 4:24 pm
- Location: New Zealand
Re: Blaser k95 straight stock ordered
That's much appreciated thanks Tim.
Your stock dimensions would be very close to my own fit so will be good to handle in the flesh.
And yes I live in Ch-Ch.
Cheers
Darryl
Your stock dimensions would be very close to my own fit so will be good to handle in the flesh.
And yes I live in Ch-Ch.
Cheers
Darryl
-
- Meister der jagd
- Posts: 588
- Joined: Fri Jun 12, 2009 7:50 am
- Location: Oklahoma
- Location: Edmond, OK
Re: Blaser k95 straight stock ordered
Congrats on the custom stock. I'll be anxious to see it when you take possession.
Shoot low sheriff, they're riding shetlands.
- O4ak95
- Posts: 381
- Joined: Thu Mar 24, 2016 9:04 pm
- Location: New Zealand
Re: Blaser k95 straight stock ordered
Thanks Ok H. I'll put up a few photos when I get my mitts on it, hopefully along side a nice red stag. It would have been nice if Blaser re-introduced the straight stock version of the k95, seems like there is plenty of interest out there.Ok Hunter wrote:Congrats on the custom stock. I'll be anxious to see it when you take possession.
Cheers Tim
-
- Meister der jagd
- Posts: 588
- Joined: Fri Jun 12, 2009 7:50 am
- Location: Oklahoma
- Location: Edmond, OK
Re: Blaser k95 straight stock ordered
You're right Tim. there is plenty of interest here in the US as well. I have a straight stock on my 7mm-08 & 6.5 CM and a Luxus Stutzen with the typical Bavarian Hog Back in 243.
Shoot low sheriff, they're riding shetlands.
- O4ak95
- Posts: 381
- Joined: Thu Mar 24, 2016 9:04 pm
- Location: New Zealand
Re: Blaser k95 straight stock ordered
I should have it by the end of the week! The importer sent this photo through last week. The custom stock looks very true to the original design . Straight grain wouldn't be my first pick ,I prefer a bit of figure in the grain but it has great colour which I do like a lot. I had always thought that straight grain stopped at grade 2 ? This is grade 4. I think its grade 6 wood before you get to choose your timber? Fingers crossed it comes up to the shoulder like it should. Cheers Tim
You do not have the required permissions to view the files attached to this post.
- stokesrj
- Moderator
- Posts: 5918
- Joined: Mon Jun 17, 2013 12:41 pm
- Location: USA
- Location: Mesa AZ, USA
Re: Blaser k95 straight stock ordered
Beautiful gun, I like the wood on this one. Hope it fits the way you like.
Robert J Stokes
- mchughcb
- Moderator
- Posts: 11163
- Joined: Tue Aug 25, 2009 2:55 am
- Location: Melbourne Australia
Re: Blaser k95 straight stock ordered
Looking good Tim!
-
- Meister der jagd
- Posts: 4465
- Joined: Wed Mar 05, 2014 4:37 am
- Location: Brisbane
Re: Blaser k95 straight stock ordered
That's a lovely piece of wood Tim.
I like the straight grain, and it has really good contrast.
I like the straight grain, and it has really good contrast.
Life is too short to hunt with an ugly dog.
Hunt with a German Shorthaired Pointer.
Hunt with a German Shorthaired Pointer.
-
- Posts: 337
- Joined: Sat Aug 06, 2016 5:40 am
- Location: New Zealand
Re: Blaser k95 straight stock ordered
Nice Tim! The wait will have been worth it.
- SPEEDY
- Moderator
- Posts: 11302
- Joined: Wed Jul 08, 2009 7:50 am
- Location: Southern highland- Australia
- Location: Albury, NSW, Australia
Re: Blaser k95 straight stock ordered
That is beautiful, and I rarely say that about another man's wood.
I'm soft and I don't care.
- chalky
- Meister der jagd
- Posts: 1550
- Joined: Thu May 09, 2013 10:03 am
- Location: Ireland
- Location: Ireland
Re: Blaser k95 straight stock ordered
Great looking rifle Tim best of luck with it.
Steve
Steve
-
- Meister der jagd
- Posts: 2831
- Joined: Fri Nov 29, 2013 5:50 pm
- Location: Oklahoma
Re: Blaser k95 straight stock ordered
I like it. I like it a lot. I've always heard that straight stocks like that are stronger. No idea how much of a difference it makes or not but there may be an advantage there. It's a good looking rifle either way. If I were to order a new K95 it would be the black edition.
- O4ak95
- Posts: 381
- Joined: Thu Mar 24, 2016 9:04 pm
- Location: New Zealand
Re: Blaser k95 straight stock ordered
Good to get a few "likes" from the pros. Thanks.
I'm pretty sure the timber will grow on me fairly quickly. The importer assured me that the photos don't do the grain justice. He said that it has a lot more depth to the grain than the photo shows.
Eddie I'm not sure about strength but I have heard that recoil is better distributed through a straight stock. I will be using a fairly mild load through the 7mm rem mag barrel so I don't think recoil will be an issue.
I'll post a photo when I get it scoped?
Cheers Tim
I'm pretty sure the timber will grow on me fairly quickly. The importer assured me that the photos don't do the grain justice. He said that it has a lot more depth to the grain than the photo shows.
Eddie I'm not sure about strength but I have heard that recoil is better distributed through a straight stock. I will be using a fairly mild load through the 7mm rem mag barrel so I don't think recoil will be an issue.
I'll post a photo when I get it scoped?
Cheers Tim
- Vaughan
- Moderator
- Posts: 3531
- Joined: Wed Jun 17, 2009 12:43 pm
- Location: Northern Sweden
Re: Blaser k95 straight stock ordered
Nice looking rifle. I'll add my vote for the wood. Curly grain is nice too but that is also stiking in its own way. I like the look of the stock as well, except the the cheek piece is on the wrong side.....
/Vaughan
Real dogs have beards
Real dogs have beards