K95 22 rimfire
Moderators: Gun Barrel Ecologist, Dom, mchughcb, pagosawingnut
-
- Meister der jagd
- Posts: 1149
- Joined: Thu Apr 12, 2012 12:41 pm
- Location: Ohio
- Location: Ohio
K95 22 rimfire
I do not consider this an aftermarket barrel but if the moderators do please delete it and accept my apologies
If you want a 22 rimfire for your K95 here is how I did it: You must have a 9.3x74R barrel to start with. Then buy this kit.
From top to bottom plastic rod to install and remove barrel
Barrel
Cartridge holder
22 cartridge
First clean your barrel of carbon deposits and dry it by running some patches through it
Insert the barrel into the your barrel from the chamber gently and use the plastic rod to seat it all the way in. The pointer is showing a sleeve you can screw in and out to adjust for headspace this only needs to be done when you first set it up.
If you want a 22 rimfire for your K95 here is how I did it: You must have a 9.3x74R barrel to start with. Then buy this kit.
From top to bottom plastic rod to install and remove barrel
Barrel
Cartridge holder
22 cartridge
First clean your barrel of carbon deposits and dry it by running some patches through it
Insert the barrel into the your barrel from the chamber gently and use the plastic rod to seat it all the way in. The pointer is showing a sleeve you can screw in and out to adjust for headspace this only needs to be done when you first set it up.
You do not have the required permissions to view the files attached to this post.
-
- Meister der jagd
- Posts: 1149
- Joined: Thu Apr 12, 2012 12:41 pm
- Location: Ohio
- Location: Ohio
Re: K95 22 rimfire
The next two pictures show the cartridge carrier with and without a cartridge in it.
I have a separate scope set up for it so I am always ready to load and shoot squirrels chipmunks and targets.
When done shooting push the barrel back out by using the plastic rod inserted from the muzzle. Then I clean my barrel.
You load this just as you would a normal round.
This is how it is seated inside the barrel, you need to take your time setting the headspace correctly so you don’t crush the 22 barrel or push the headspace adjuster to far forward. It is easy to do and took me less than 15 minutes.I have a separate scope set up for it so I am always ready to load and shoot squirrels chipmunks and targets.
When done shooting push the barrel back out by using the plastic rod inserted from the muzzle. Then I clean my barrel.
You do not have the required permissions to view the files attached to this post.
-
- Meister der jagd
- Posts: 1149
- Joined: Thu Apr 12, 2012 12:41 pm
- Location: Ohio
- Location: Ohio
Re: K95 22 rimfire
50 yard group using CCI segmented hollow points 710 fps load. I haven’t tried a lot of different loads but these are adequate for what I use this for and it kills squirrels.
You do not have the required permissions to view the files attached to this post.
-
- Meister der jagd
- Posts: 1149
- Joined: Thu Apr 12, 2012 12:41 pm
- Location: Ohio
- Location: Ohio
Re: K95 22 rimfire
I really wish that Blaser would make a .22 kit for the K95 it is on my Christmas wish list again this year, but until then I have this setup.
Matt
Matt
-
- Meister der jagd
- Posts: 4465
- Joined: Wed Mar 05, 2014 4:37 am
- Location: Brisbane
Re: K95 22 rimfire
Geez, that’s clever.
Life is too short to hunt with an ugly dog.
Hunt with a German Shorthaired Pointer.
Hunt with a German Shorthaired Pointer.
- jamesc
- Posts: 276
- Joined: Sat Apr 22, 2017 12:24 am
- Location: Orange - NSW Australia
Re: K95 22 rimfire
Nice solution, ive been looking at the jagerblock and it wouldn't be hard to modify one to work for a rimfire. Might take some trail and error. Barrel would be the easiest part
- stokesrj
- Moderator
- Posts: 5918
- Joined: Mon Jun 17, 2013 12:41 pm
- Location: USA
- Location: Mesa AZ, USA
Re: K95 22 rimfire
That is excellent accuracy with that particular load, my R8 or Anschutz will not do that. You owe it to yourself to try the 1050 FPS loading of that bullet as it is much more accurate in my rifles and my Ruger 22/45 suppressed anyway. With the 1050 FPS loading I have killed all kinds of varmints and the segmented hollow point is the cat's meow when it comes to low impact velocity terminal performance, it is superb.
Robert J Stokes
- mchughcb
- Moderator
- Posts: 11162
- Joined: Tue Aug 25, 2009 2:55 am
- Location: Melbourne Australia
Re: K95 22 rimfire
Very interesting.
- SPEEDY
- Moderator
- Posts: 11301
- Joined: Wed Jul 08, 2009 7:50 am
- Location: Southern highland- Australia
- Location: Albury, NSW, Australia
Re: K95 22 rimfire
Definitely something damn nice to have, I came close with my 22 hornet barrel and trailboss load.
But this is definitely taking it to the next level.
But this is definitely taking it to the next level.
I'm soft and I don't care.