QuickLOAD indicates IMR 4895 should produce around 2350 fps and still be under max pressure.
That looks to be around maximum velocity without knowing your barrel length, bullet you are using, and fired case capacity.
Good luck.
Quick load request
Moderators: deerhunter338mag, Vaughan, stokesrj
- Gun Barrel Ecologist
- Moderator
- Posts: 5052
- Joined: Sun Aug 23, 2009 12:54 pm
- Location: New Zealand
Re: Quick load request
That powder is closest equivalent to AR 2206H according to http://www.adi-powders.com.au/handloade ... alents.asp
- SPEEDY
- Moderator
- Posts: 11282
- Joined: Wed Jul 08, 2009 7:50 am
- Location: Southern highland- Australia
- Location: Albury, NSW, Australia
Re: Quick load request
That could be a close match but not an exact one.
Definitely a work up to it load thats for sure.
Definitely a work up to it load thats for sure.
I'm soft and I don't care.
-
- Posts: 19
- Joined: Wed Dec 09, 2015 9:36 am
- Location: USA
Re: Quick load request
Really hard to be more helpful without barrel length and actual bullet being used.
I used 20 inch for the barrel and a 220 grain Partition.
I used 20 inch for the barrel and a 220 grain Partition.
- SPEEDY
- Moderator
- Posts: 11282
- Joined: Wed Jul 08, 2009 7:50 am
- Location: Southern highland- Australia
- Location: Albury, NSW, Australia