.500 Jeffery Loads

HunterAU · Post by **HunterAU** » Sat Jul 18, 2009 9:58 am

I just purchased a 500 Jeffery and need to get press some loads.. What are your loads? I am loading 535grain and 600grain Woodleighs. Any load data will be helpfull.

Post by **Corjack** » Sat Jul 18, 2009 11:00 pm

This is all I could find

535 grain bullet AR-2206 From 78.0 grains to 96.0 grains

HunterAU · Post by **HunterAU** » Sun Jul 19, 2009 3:53 am

Corjack63 wrote:This is all I could find

535 grain bullet AR-2206 From 78.0 grains to 96.0 grains

Thanks mate..!

Post by **Explorer** » Sun Jul 19, 2009 5:13 am

Congrats with your new toy, must be for the big boy

http://www.youtube.com/watch?v=Bf57L3rptxY

Must be this calibre we are talking about? (I can calculate you some loads from Qload if you like?)

500jefff.jpg

HunterAU · Post by **HunterAU** » Sun Jul 19, 2009 5:24 am

Blasergun i would appreciate that mate..! Thanks.

Post by **Explorer** » Sun Jul 19, 2009 6:25 am

Which of the bullets are you planning to use http://www.woodleighbullets.com.au/Bull ... chor-56106 (there is no 545 grain) and do you have any COAL you would like to use?

To make the calculation better we could use data about your case volume meassured in grain H2O, case must be fired in your rifle

HunterAU · Post by **HunterAU** » Sun Jul 19, 2009 6:39 am

Sorry mate typeo.. its a 535 grain pp and a 600 grain pp.

Post by **Explorer** » Sun Jul 19, 2009 9:42 am

I've generated you a few loads in the attached for the 535 PP WC, I would suggest to start with the min load for the first loads you generate, and you can meassure if the bullet length is correct (generated from Qload bullet list)
To display your pressure you ca use the techniques descibed here http://forums.accuratereloading.com/eve ... 023011/p/3 will try to make the same descriton here on BB

535 PP WeldCore.pdf

Will add a pdf with loads for the 600 grain later on

HunterAU · Post by **HunterAU** » Sun Jul 19, 2009 6:23 pm

Thanks for that mate..!!!!

btm_54 · Post by **btm_54** » Sun Jul 26, 2009 10:43 am

Steves pages http://stevespages.com/511_2_535.html
I think I saw some AR2206 at HPGS
Cheers,
btm_54

HunterAU · Post by **HunterAU** » Sun Jul 26, 2009 5:10 pm

Thanks for that..!!

Post by **Explorer** » Sun Aug 23, 2009 7:08 am

How did the COAL fit your rifle with the 535 PP WeldCore loads I generated?

HunterAU · Post by **HunterAU** » Sun Aug 23, 2009 7:28 am

Thanks mate it worked well.. Can you generate one for the 600 grain projectiles?

Thanks again..

Post by **Explorer** » Sun Aug 23, 2009 8:51 am

You're welcome, here we go wtih the 600 grainer

600 PP WeldCore.pdf

HunterAU · Post by **HunterAU** » Sun Aug 23, 2009 6:08 pm

Thanks for that mate.!! Will let you know how they turn out.

Blaserbuds; the worlds superlative information source, for these products

.500 Jeffery Loads

.500 Jeffery Loads

Re: .500 Jeffery Loads

Re: .500 Jeffery Loads

Re: .500 Jeffery Loads

Re: .500 Jeffery Loads

Re: .500 Jeffery Loads

Re: .500 Jeffery Loads

Re: .500 Jeffery Loads

Re: .500 Jeffery Loads

Re: .500 Jeffery Loads

Re: .500 Jeffery Loads

Re: .500 Jeffery Loads

Re: .500 Jeffery Loads

Re: .500 Jeffery Loads

Re: .500 Jeffery Loads