How come??
Barrelguy - custom barrels for R93 & R8 Blasers
Moderators: deerhunter338mag, pagosawingnut
-
- Meister der jagd
- Posts: 4344
- Joined: Sat Jul 14, 2012 7:53 am
- Location: Melbourne AUSTRALIA
- deerhunter338mag
- Global Moderator
- Posts: 9874
- Joined: Fri Jun 12, 2009 12:50 am
- Location: Australia
- Location: Melbourne Australia
Re: Barrelguy - custom barrels for R93 & R8 Blasers
just paperwork that's all
Measure it, when it’s on the deck
-
- Meister der jagd
- Posts: 2305
- Joined: Fri Nov 23, 2012 8:22 pm
- Location: Victoria Australia
- deerhunter338mag
- Global Moderator
- Posts: 9874
- Joined: Fri Jun 12, 2009 12:50 am
- Location: Australia
- Location: Melbourne Australia
Re: Barrelguy - custom barrels for R93 & R8 Blasers
mine is a 338Rum And Joes is a 338Lapimp
Measure it, when it’s on the deck
-
- Meister der jagd
- Posts: 4344
- Joined: Sat Jul 14, 2012 7:53 am
- Location: Melbourne AUSTRALIA
Re: Barrelguy - custom barrels for R93 & R8 Blasers
What about everyone else's??
-
- Meister der jagd
- Posts: 2305
- Joined: Fri Nov 23, 2012 8:22 pm
- Location: Victoria Australia
Re: Barrelguy - custom barrels for R93 & R8 Blasers
Of course. Silly medeerhunter338mag wrote: ↑Tue Jul 23, 2019 7:08 pmmine is a 338Rum And Joes is a 338Lapimp
-
- Posts: 14
- Joined: Sun Nov 20, 2016 8:35 pm
- Location: Maine
- Location: Maine
- deerhunter338mag
- Global Moderator
- Posts: 9874
- Joined: Fri Jun 12, 2009 12:50 am
- Location: Australia
- Location: Melbourne Australia
Re: Barrelguy - custom barrels for R93 & R8 Blasers
Well there here. I picked them up this morning from UPS and they are magnificently made. I tried my 338Rum barrel when I got home and it fitted perfectly. I made few dummy round to see how the action worked and it was awesome. I'm going to load the 250gr EH bergers so it will be single feed. However I might try the 270gr ELDx to see how they go mag fed. Now to get the brake fitted and painted. I also sent Elmer an email to let him know he's babies arrived safe and sound and he was rapped. Let the fun begin.
You do not have the required permissions to view the files attached to this post.
Measure it, when it’s on the deck
- mchughcb
- Moderator
- Posts: 11163
- Joined: Tue Aug 25, 2009 2:55 am
- Location: Melbourne Australia
Re: Barrelguy - custom barrels for R93 & R8 Blasers
Finally. Not too hard was it lol!
- deerhunter338mag
- Global Moderator
- Posts: 9874
- Joined: Fri Jun 12, 2009 12:50 am
- Location: Australia
- Location: Melbourne Australia
Re: Barrelguy - custom barrels for R93 & R8 Blasers
Measure it, when it’s on the deck
-
- Meister der jagd
- Posts: 4344
- Joined: Sat Jul 14, 2012 7:53 am
- Location: Melbourne AUSTRALIA
Re: Barrelguy - custom barrels for R93 & R8 Blasers
- SPEEDY
- Moderator
- Posts: 11302
- Joined: Wed Jul 08, 2009 7:50 am
- Location: Southern highland- Australia
- Location: Albury, NSW, Australia
Re: Barrelguy - custom barrels for R93 & R8 Blasers
Now to see how they shoot.
I'm soft and I don't care.
- deerhunter338mag
- Global Moderator
- Posts: 9874
- Joined: Fri Jun 12, 2009 12:50 am
- Location: Australia
- Location: Melbourne Australia
Re: Barrelguy - custom barrels for R93 & R8 Blasers
Need to fit a brake 1st and then cerakote it. Be a very nasty punch without a brake
Measure it, when it’s on the deck
- SPEEDY
- Moderator
- Posts: 11302
- Joined: Wed Jul 08, 2009 7:50 am
- Location: Southern highland- Australia
- Location: Albury, NSW, Australia
Re: Barrelguy - custom barrels for R93 & R8 Blasers
Ah, save your money and just buy some wheatbix.deerhunter338mag wrote: ↑Thu Dec 05, 2019 7:32 amNeed to fit a brake 1st and then cerakote it. Be a very nasty punch without a brake
I'm soft and I don't care.
-
- Meister der jagd
- Posts: 4344
- Joined: Sat Jul 14, 2012 7:53 am
- Location: Melbourne AUSTRALIA