Barrelguy - custom barrels for R93 & R8 Blasers

A place where new members can introduce themselves.

Moderators: deerhunter338mag, pagosawingnut

TheoR8
Meister der jagd
Posts: 3783
kuchnie na wymiar kraków nowoczesnekuchnie
Joined: Sat Jul 14, 2012 7:53 am
Location: Melbourne AUSTRALIA

Re: Barrelguy - custom barrels for R93 & R8 Blasers

Post by TheoR8 »

Joe338ST wrote:
Tue Jul 23, 2019 6:28 am
Still a few more months of sleeps I think.....
How come?? :confusion-shrug: :handgestures-thumbup:



User avatar
deerhunter338mag
Global Moderator
Posts: 8889
Joined: Fri Jun 12, 2009 12:50 am
Location: Australia
Location: Melbourne Australia

Re: Barrelguy - custom barrels for R93 & R8 Blasers

Post by deerhunter338mag »

TheoR8 wrote:
Tue Jul 23, 2019 6:43 am
Joe338ST wrote:
Tue Jul 23, 2019 6:28 am
Still a few more months of sleeps I think.....
How come?? :confusion-shrug: :handgestures-thumbup:
just paperwork that's all
Measure it, when it’s on the deck

secondtry
Meister der jagd
Posts: 1797
Joined: Fri Nov 23, 2012 8:22 pm
Location: Victoria Australia

Re: Barrelguy - custom barrels for R93 & R8 Blasers

Post by secondtry »

deerhunter338mag wrote:
Tue Jul 23, 2019 7:57 am
TheoR8 wrote:
Tue Jul 23, 2019 6:43 am
Joe338ST wrote:
Tue Jul 23, 2019 6:28 am
Still a few more months of sleeps I think.....
How come?? :confusion-shrug: :handgestures-thumbup:
just paperwork that's all
Maybe I missed it in the thread, but what calibres ?

User avatar
deerhunter338mag
Global Moderator
Posts: 8889
Joined: Fri Jun 12, 2009 12:50 am
Location: Australia
Location: Melbourne Australia

Re: Barrelguy - custom barrels for R93 & R8 Blasers

Post by deerhunter338mag »

secondtry wrote:
Tue Jul 23, 2019 6:44 pm
deerhunter338mag wrote:
Tue Jul 23, 2019 7:57 am
TheoR8 wrote:
Tue Jul 23, 2019 6:43 am


How come?? :confusion-shrug: :handgestures-thumbup:
just paperwork that's all
Maybe I missed it in the thread, but what calibres ?
mine is a 338Rum And Joes is a 338Lapimp
Measure it, when it’s on the deck

TheoR8
Meister der jagd
Posts: 3783
Joined: Sat Jul 14, 2012 7:53 am
Location: Melbourne AUSTRALIA

Re: Barrelguy - custom barrels for R93 & R8 Blasers

Post by TheoR8 »

deerhunter338mag wrote:
Tue Jul 23, 2019 7:08 pm
mine is a 338Rum And Joes is a 338Lapimp
What about everyone else's?? :handgestures-thumbup:

secondtry
Meister der jagd
Posts: 1797
Joined: Fri Nov 23, 2012 8:22 pm
Location: Victoria Australia

Re: Barrelguy - custom barrels for R93 & R8 Blasers

Post by secondtry »

deerhunter338mag wrote:
Tue Jul 23, 2019 7:08 pm
secondtry wrote:
Tue Jul 23, 2019 6:44 pm
deerhunter338mag wrote:
Tue Jul 23, 2019 7:57 am


just paperwork that's all
Maybe I missed it in the thread, but what calibres ?
mine is a 338Rum And Joes is a 338Lapimp
Of course. Silly me :lol: :lol:

Prelude8626
Posts: 14
Joined: Sun Nov 20, 2016 8:35 pm
Location: Maine
Location: Maine

Re: Barrelguy - custom barrels for R93 & R8 Blasers

Post by Prelude8626 »

Welcome!

User avatar
deerhunter338mag
Global Moderator
Posts: 8889
Joined: Fri Jun 12, 2009 12:50 am
Location: Australia
Location: Melbourne Australia

Re: Barrelguy - custom barrels for R93 & R8 Blasers

Post by deerhunter338mag »

Well there here. :dance: I picked them up this morning from UPS and they are magnificently made. I tried my 338Rum barrel when I got home and it fitted perfectly. I made few dummy round to see how the action worked and it was awesome. I'm going to load the 250gr EH bergers so it will be single feed. However I might try the 270gr ELDx to see how they go mag fed. Now to get the brake fitted and painted. I also sent Elmer an email to let him know he's babies arrived safe and sound and he was rapped. Let the fun begin. :dance: :dance:
You do not have the required permissions to view the files attached to this post.
Measure it, when it’s on the deck

User avatar
mchughcb
Moderator
Posts: 10309
Joined: Tue Aug 25, 2009 2:55 am
Location: Melbourne Australia

Re: Barrelguy - custom barrels for R93 & R8 Blasers

Post by mchughcb »

Finally. Not too hard was it lol!

User avatar
deerhunter338mag
Global Moderator
Posts: 8889
Joined: Fri Jun 12, 2009 12:50 am
Location: Australia
Location: Melbourne Australia

Re: Barrelguy - custom barrels for R93 & R8 Blasers

Post by deerhunter338mag »

mchughcb wrote:
Wed Dec 04, 2019 9:52 pm
Finally. Not too hard was it lol!
Fark no,, :doh: :lol: :lol: :lol: :lol:
Measure it, when it’s on the deck

TheoR8
Meister der jagd
Posts: 3783
Joined: Sat Jul 14, 2012 7:53 am
Location: Melbourne AUSTRALIA

Re: Barrelguy - custom barrels for R93 & R8 Blasers

Post by TheoR8 »

deerhunter338mag wrote:
Thu Dec 05, 2019 2:17 am
mchughcb wrote:
Wed Dec 04, 2019 9:52 pm
Finally. Not too hard was it lol!
Fark no,, :doh: :lol: :lol: :lol: :lol:
:lol: :lol: :lol: :lol: :handgestures-thumbup:

User avatar
SPEEDY
Moderator
Posts: 9648
Joined: Wed Jul 08, 2009 7:50 am
Location: Southern highland- Australia
Location: Albury, NSW, Australia

Re: Barrelguy - custom barrels for R93 & R8 Blasers

Post by SPEEDY »

Now to see how they shoot.
I'm soft and I don't care. :dance:

User avatar
deerhunter338mag
Global Moderator
Posts: 8889
Joined: Fri Jun 12, 2009 12:50 am
Location: Australia
Location: Melbourne Australia

Re: Barrelguy - custom barrels for R93 & R8 Blasers

Post by deerhunter338mag »

SPEEDY wrote:
Thu Dec 05, 2019 6:23 am
Now to see how they shoot.
Need to fit a brake 1st and then cerakote it. Be a very nasty punch without a brake :lol: :lol:
Measure it, when it’s on the deck

User avatar
SPEEDY
Moderator
Posts: 9648
Joined: Wed Jul 08, 2009 7:50 am
Location: Southern highland- Australia
Location: Albury, NSW, Australia

Re: Barrelguy - custom barrels for R93 & R8 Blasers

Post by SPEEDY »

deerhunter338mag wrote:
Thu Dec 05, 2019 7:32 am
SPEEDY wrote:
Thu Dec 05, 2019 6:23 am
Now to see how they shoot.
Need to fit a brake 1st and then cerakote it. Be a very nasty punch without a brake :lol: :lol:
Ah, save your money and just buy some wheatbix. :lol:
I'm soft and I don't care. :dance:

TheoR8
Meister der jagd
Posts: 3783
Joined: Sat Jul 14, 2012 7:53 am
Location: Melbourne AUSTRALIA

Re: Barrelguy - custom barrels for R93 & R8 Blasers

Post by TheoR8 »

SPEEDY wrote:
Thu Dec 05, 2019 9:17 am
Ah, save your money and just buy some wheatbix. :lol:
Or a recoil bra aka man bra. :lol: :lol: :lol: :handgestures-thumbup:

Post Reply

Return to “BlaserBuds Introductions”