New Aussie member

A place where new members can introduce themselves.

Moderators: deerhunter338mag, pagosawingnut

Post Reply
thomasr1969
Posts: 155
Joined: Sun Oct 09, 2016 3:21 am
Location: Australia

New Aussie member

Post by thomasr1969 »

Hi Folks
My name is Bob and I'm in Melbourne. I have a Blaser Tactical 2 and two M03's (I have other stuff but they are applicable to this site).
I'm looking forward to learning more about the R8s and finding out where I can get some more barrels for my current rifles.
It looks like you fellas have a great site here and I look forward to learning a lot. I know all of the Melbourne guys may point me to Mialls but I would like some other options also.

Bob
Top
TheoR8
Meister der jagd
Posts: 4344
Joined: Sat Jul 14, 2012 7:53 am
Location: Melbourne AUSTRALIA

Re: New Aussie member

Post by TheoR8 »

:text-welcomewave: to BlaserBuds Bob. :flags-australia: :handgestures-thumbup:
Top
9.3x64
Meister der jagd
Posts: 4468
Joined: Wed Mar 05, 2014 4:37 am
Location: Brisbane

Re: New Aussie member

Post by 9.3x64 »

Welcome aboard mate.
Plenty of Blaserbuds in Victoria.
Great site with friendly members and a wealth of knowledge.
Life is too short to hunt with an ugly dog.
Hunt with a German Shorthaired Pointer.
Top
User avatar
deerhunter338mag
Global Moderator
Posts: 9876
Joined: Fri Jun 12, 2009 12:50 am
Location: Australia
Location: Melbourne Australia

Re: New Aussie member

Post by deerhunter338mag »

Welcome aboard Bob hope you like it here, as there's a few of us Victorians on here. You can go to Gunco for your Blaser gear. Just ask for Danny and tell him Theo sent you and to put it on his tab :D :lol: :lol: :lol: :lol: :lol:
Measure it, when it’s on the deck
Top
thomasr1969
Posts: 155
Joined: Sun Oct 09, 2016 3:21 am
Location: Australia

Re: New Aussie member

Post by thomasr1969 »

Thanks Fellas.
Did not consider Gunco and I did not realise that they sold Blaser stuff. I have learned something already!!
Thanks

Bob
Top
TheoR8
Meister der jagd
Posts: 4344
Joined: Sat Jul 14, 2012 7:53 am
Location: Melbourne AUSTRALIA

Re: New Aussie member

Post by TheoR8 »

deerhunter338mag wrote:You can go to Gunco for your Blaser gear. Just ask for Danny and tell him Theo sent you and to put it on his tab :D :lol: :lol: :lol: :lol: :lol:
Bawhahahaha :obscene-birdiedoublegreen: :obscene-buttmoon: :obscene-sexualvlick: :lol: :lol:

Archie from Clayton Firearms can help you as well, but they do not stock anything Blaser. :handgestures-thumbup:
Top
User avatar
sav338
Meister der jagd
Posts: 2522
Joined: Fri May 03, 2013 6:25 am
Location: Australia
Location: Melbourne

Re: New Aussie member

Post by sav338 »

Welcome to the forum Bob , it is a wealth of knowledge here as for getting Blaser gear, it all depends on where you live in OZ there are more stores that stock Blaser.
Mialls is the importer For Blaser in Aus ,I know Gunco orders theirs as a seperate consignment but still through Mialls. Danny is easy to deal with but can at times try to sell you more than what you come in for. If not in stock be prepared to wait. just ask Theo
:lol:
Good luck,
Steve
Last edited by sav338 on Wed Oct 12, 2016 3:45 am, edited 1 time in total.
Top
7x57
Meister der jagd
Posts: 1082
Joined: Tue Oct 23, 2012 1:21 am
Location: Australia
Location: Tasmania

Re: New Aussie member

Post by 7x57 »

Welcome to the forum Bob . Great folks here and a wealth of knowledge.
Top
thomasr1969
Posts: 155
Joined: Sun Oct 09, 2016 3:21 am
Location: Australia

Re: New Aussie member

Post by thomasr1969 »

Ha.
Every gun shop I have ever been in has sold me more than I come in for. My wife will attest to that. Normally I would stick with Clayton because they have been so good to me for a long time (Damo) but I'm going to simplify my gunsafe (brandwise) and I have decided to build my Mauser/Blaser collection. Now I just need to decide what I want next ........

Bob
Top
User avatar
SPEEDY
Moderator
Posts: 11302
Joined: Wed Jul 08, 2009 7:50 am
Location: Southern highland- Australia
Location: Albury, NSW, Australia

Re: New Aussie member

Post by SPEEDY »

Good to see another Aussie, you have the pic of Blaser stuff down there, or at least as good as it gets down here.
I'm soft and I don't care. :dance:
Top
TheoR8
Meister der jagd
Posts: 4344
Joined: Sat Jul 14, 2012 7:53 am
Location: Melbourne AUSTRALIA

Re: New Aussie member

Post by TheoR8 »

thomasr1969 wrote:Ha.
Every gun shop I have ever been in has sold me more than I come in for. My wife will attest to that. Normally I would stick with Clayton because they have been so good to me for a long time (Damo) but I'm going to simplify my gunsafe (brandwise) and I have decided to build my Mauser/Blaser collection. Now I just need to decide what I want next ........

Bob
For Mauser I think Mialls are the only one's that stock them, I did the same, I pissed off all my Remingtons and Sakos, and went Blaser all the way. I do own two Mauser M12's which I will never get rid off. :handgestures-thumbup:
Top
TheoR8
Meister der jagd
Posts: 4344
Joined: Sat Jul 14, 2012 7:53 am
Location: Melbourne AUSTRALIA

Re: New Aussie member

Post by TheoR8 »

sav338 wrote:If not in stock be prepared to wait. just ask Theo
:lol:
Good luck,
Steve
Lol. :handgestures-thumbup:
Last edited by TheoR8 on Sat Mar 07, 2020 6:55 am, edited 1 time in total.
Top
User avatar
stokesrj
Moderator
Posts: 5921
Joined: Mon Jun 17, 2013 12:41 pm
Location: USA
Location: Mesa AZ, USA

Re: New Aussie member

Post by stokesrj »

Welcome to Blaser Buds Bob. Happy to have you here.
Robert J Stokes
Top
Guest

Re: New Aussie member

Post by Guest »

Welcome to the forum Bob great to have you here.

Sent from my SM-G903F using Tapatalk
Top
User avatar
chalky
Meister der jagd
Posts: 1550
Joined: Thu May 09, 2013 10:03 am
Location: Ireland
Location: Ireland

Re: New Aussie member

Post by chalky »

Welcome to the forum Bob great to have you here.

Sent from my SM-G903F using Tapatalk
Top
Post Reply

Return to “BlaserBuds Introductions”