This combo was phenomenal in my Blaser Pro. Going to try this Akila out.
A big thanks to Jason of Euro for helping me get this together
Akila Chassis for my Blaser 300 Norma
Moderators: deerhunter338mag, stokesrj, trazman
-
longrider
- Meister der jagd
- Posts: 1000
- Joined: Sat Mar 26, 2011 5:02 pm
- Location: Cody USA
- Location: Cody, Wyoming
Akila Chassis for my Blaser 300 Norma
You do not have the required permissions to view the files attached to this post.
Brad
-
ebrownw2
- Meister der jagd
- Posts: 2831
- Joined: Fri Nov 29, 2013 5:50 pm
- Location: Oklahoma
Re: Akila Chassis for my Blaser 300 Norma
That’s a pretty hard core setup. What is the purpose of the gauze tape around the front half of the scope?
-
longrider
- Meister der jagd
- Posts: 1000
- Joined: Sat Mar 26, 2011 5:02 pm
- Location: Cody USA
- Location: Cody, Wyoming
Re: Akila Chassis for my Blaser 300 Norma
Pretty easy to bang up the front of the scope, so I use medical wrap for protection
Brad
-
Joe338ST
- Meister der jagd
- Posts: 1816
- Joined: Sat Oct 21, 2017 8:32 am
- Location: Australia
Re: Akila Chassis for my Blaser 300 Norma
Brad, that is a nice looking set-up !
Looking forward to see how it shoots!
Looking forward to see how it shoots!
Last edited by Joe338ST on Sun Aug 30, 2020 4:33 am, edited 1 time in total.
Joe
I hunt, I shoot, I camp, I fish. They are the great reset buttons in my life.
I hunt, I shoot, I camp, I fish. They are the great reset buttons in my life.
-
longrider
- Meister der jagd
- Posts: 1000
- Joined: Sat Mar 26, 2011 5:02 pm
- Location: Cody USA
- Location: Cody, Wyoming
Re: Akila Chassis for my Blaser 300 Norma
I just returned from dialing in the rig with factory Norma berger 230 OTM’s.
Nice adjustments w/o tools, very comfortable and well thought out chassis. The rear monopod very well thought out, with quick adjustment and fine. 13.5# total weight with match barrel etc.
4 rds to get my 100 zero, last 2 touching dead on @100. Instead of popping some steel close up (Cody Gun Club) I ranged one of our plates @ 1109 dialed 7.2 and turned the red light on first round. I then turned to our faithful coyote plate @ 1064 and rang his bell with a center hit with 6.7 mils. 547, 1120 and then a perfect 1.4 hold off @ 400 yds.
Flawless setup, what a hoot to shoot, 13 rds after sight in with 13 hits.
I just renamed my Akila “Akiller” for this hunting season’s LR overlook setup.
I just added the RRS 9.5” dovetail to the m-lok forend and the pro- clamp for my TBAC bipod. Great system for dovetail (ARCA) or picatinny.
This 300 win Blaser is my 8.5 pound rig for hauling into high country, it too is sub 1/2 moa (Barnes Factory 195 LRX)
Nice adjustments w/o tools, very comfortable and well thought out chassis. The rear monopod very well thought out, with quick adjustment and fine. 13.5# total weight with match barrel etc.
4 rds to get my 100 zero, last 2 touching dead on @100. Instead of popping some steel close up (Cody Gun Club) I ranged one of our plates @ 1109 dialed 7.2 and turned the red light on first round. I then turned to our faithful coyote plate @ 1064 and rang his bell with a center hit with 6.7 mils. 547, 1120 and then a perfect 1.4 hold off @ 400 yds.
Flawless setup, what a hoot to shoot, 13 rds after sight in with 13 hits.
I just renamed my Akila “Akiller” for this hunting season’s LR overlook setup.
I just added the RRS 9.5” dovetail to the m-lok forend and the pro- clamp for my TBAC bipod. Great system for dovetail (ARCA) or picatinny.
This 300 win Blaser is my 8.5 pound rig for hauling into high country, it too is sub 1/2 moa (Barnes Factory 195 LRX)
You do not have the required permissions to view the files attached to this post.
Brad
-
Helimech
- Posts: 1
- Joined: Tue Nov 01, 2016 6:32 pm
- Location: Usa
Re: Akila Chassis for my Blaser 300 Norma
thats a great looking AKILA set up! what optic is on your 300 min mountain rifle?
-
AxP
- Posts: 79
- Joined: Sat Mar 03, 2018 11:05 am
- Location: Transsylvania-Romania
Re: Akila Chassis for my Blaser 300 Norma
I think, it is "Zero Compromise Optic 4-20x50 FFP"
Hunting toys: Blaser R8, 9.3x62, .308Win, 6.5x55SE, Benelli Montefeltro 12Ga
-
Gingerirish
- Posts: 19
- Joined: Fri Jul 15, 2022 3:58 pm
- Location: USA
Re: Akila Chassis for my Blaser 300 Norma
@Brad .I am going to be importing an akila setup to the US , would love to chat on it. Recommendations or any issues you ran into?
Barry
Barry
-
Gamsjagd
- Meister der jagd
- Posts: 1117
- Joined: Thu Jan 11, 2018 2:04 pm
- Location: das Heimat
Re: Akila Chassis for my Blaser 300 Norma
Euro optics is a good source. They are dealers.
-
Gingerirish
- Posts: 19
- Joined: Fri Jul 15, 2022 3:58 pm
- Location: USA
-
Gamsjagd
- Meister der jagd
- Posts: 1117
- Joined: Thu Jan 11, 2018 2:04 pm
- Location: das Heimat
Re: Akila Chassis for my Blaser 300 Norma
Euro Optics generally only gets rid of things as a retailer side when they are either poor of customer service or very difficult to deal with on the shipping end. Something to consider.
-
deerhunter338mag
- Global Moderator
- Posts: 9874
- Joined: Fri Jun 12, 2009 12:50 am
- Location: Australia
- Location: Melbourne Australia
Re: Akila Chassis for my Blaser 300 Norma
Sweet looking rig there. 
Measure it, when it’s on the deck