Blaser S2 Safari Regulation

[john wyka]

can someone help me i bought a s2 and it needs regulating.iam not to good on the computure would like to talk on the phone . 0411601285 please someone ring. i have read forum. please help

[mchughcb]

What country are you in?

http://www.blaserbuds.com/forum/viewtop ... =39&t=8342

[john wyka]

sorry for taking so long to get back . iam in melbourne aust .iam hopeless on the machine would be very thankfull if you could help.it is easier to explain on the phone then on this machine.iam a hunter and i do understand about guns a bit so if you have the time please ring me. i hope that your thinking that this bloke is begging your right i am.

[pagosawingnut]

I would call you right now but it's about 4am your time. Post a good time to call and I will try and help.
Unless mchughcb can help out....
Rick

[pagosawingnut]

I have tried to call but the number you posted doesn't work from the US

[pagosawingnut]

I assume that there is a Blaser gunsmith in his neck of the woods. His rifle is not only crossing at 25 yards, the left barrel is shooting between 6 and 7 inches high. Anybody?

[mchughcb]

My blaser charge out rate is $1,000,000.
Which is half of what my dentist charged me this morning.

[pagosawingnut]

I think he warned me about you already!!! HEH HEH HEH

[mchughcb]

Well I went and saw John, today. This is not an easy fix. Stay tuned if I get a answer.

[pagosawingnut]

I'll be waiting with baited breath.....................

[thechamp]

My blaser charge out rate is $1,000,000.
Which is half of what my dentist charged me this morning.

Have you seen what it cost to go lion hunting these days? Life at that upper level is getting on the expensive side. Especially when you fail to follow all the rules. Just the new house for your lawyer isn't going to be cheap.

[mchughcb]

Just got off the phone to the blaser dealer. Nobody has regulated a safari before. Looking at it, it can be done but how is a question for the factory.

[pagosawingnut]

IF, and it is a big IF, you can get it out of the country to the US (and back into Australia), Andrej with Blaser USA in San Antonio, TX charges 65 dollars per hour to re-regulate the S2 sir. Other than that, it might have to go back to the Blaser factory.

[mchughcb]

Is that the standard or the safari. They have two different mechanisms.

Sent Blaser USA an email as well. Two heads are better than one.

[mchughcb]

Blaser USA is on to it. Should get smith by tomorrow with an answer.