Best Blaser mount for a Kahles Helia red dot?
- SPEEDY
- Moderator
- Posts: 11305
- Joined: Wed Jul 08, 2009 7:50 am
- Location: Southern highland- Australia
- Location: Albury, NSW, Australia
Best Blaser mount for a Kahles Helia red dot?
What's the best QD mount for a Kahles Helia red dot?
I've been looking and I find fixed rails and some poxy looking QD set ups but I'd like a nice tide neat minimalist qd mount to put one on.
I've been looking and I find fixed rails and some poxy looking QD set ups but I'd like a nice tide neat minimalist qd mount to put one on.
I'm soft and I don't care.
-
- Meister der jagd
- Posts: 4344
- Joined: Sat Jul 14, 2012 7:53 am
- Location: Melbourne AUSTRALIA
Re: Best Blaser mount for a Kahles Helia red dot?
Blaser have a genuine one, but none in the country yet.
- deerhunter338mag
- Global Moderator
- Posts: 9881
- Joined: Fri Jun 12, 2009 12:50 am
- Location: Australia
- Location: Melbourne Australia
Re: Best Blaser mount for a Kahles Helia red dot?
How long before there in? Just asking for a friend.
Measure it, when it’s on the deck
-
- Meister der jagd
- Posts: 4344
- Joined: Sat Jul 14, 2012 7:53 am
- Location: Melbourne AUSTRALIA
Re: Best Blaser mount for a Kahles Helia red dot?
I've got one on special order for myself, not sure if OSA will keep any in stock.deerhunter338mag wrote: ↑Mon Feb 10, 2020 6:21 amHow long before there in? Just asking for a friend.
- SPEEDY
- Moderator
- Posts: 11305
- Joined: Wed Jul 08, 2009 7:50 am
- Location: Southern highland- Australia
- Location: Albury, NSW, Australia
Re: Best Blaser mount for a Kahles Helia red dot?
Got a link or pic of it, all I can find is their new RD17 red dot.
I'm soft and I don't care.
-
- Pro Staff
- Posts: 1760
- Joined: Sat Jun 13, 2009 12:54 pm
- Location: 64807
- Location: Dieburg
- Contact:
Re: Best Blaser mount for a Kahles Helia red dot?
Well, if You want to mount it by Weaver, have a look at this mount:
https://www.titanium-gunworks.com/innom ... tinny.html
but why not mounting it directly without the Weaver option - just like a Docter Sight itself:
https://www.titanium-gunworks.com/innom ... sight.html
https://www.titanium-gunworks.com/innom ... tinny.html
but why not mounting it directly without the Weaver option - just like a Docter Sight itself:
https://www.titanium-gunworks.com/innom ... sight.html
life is too short for not having the best equipment You could buy...
http://www.titanium-gunworks.com
http://www.titanium-gunworks.com
- SPEEDY
- Moderator
- Posts: 11305
- Joined: Wed Jul 08, 2009 7:50 am
- Location: Southern highland- Australia
- Location: Albury, NSW, Australia
Re: Best Blaser mount for a Kahles Helia red dot?
I'd like to go similar to the docter but the Kahles doesn't have the same footprint as the docter it has the same as the vortex razor.
Small differences but differences all the same, I was hoping someone would make one specific for the kahles.
But I might have to go a weaver rail in a QD set up.
Small differences but differences all the same, I was hoping someone would make one specific for the kahles.
But I might have to go a weaver rail in a QD set up.
I'm soft and I don't care.
-
- Meister der jagd
- Posts: 2305
- Joined: Fri Nov 23, 2012 8:22 pm
- Location: Victoria Australia
Re: Best Blaser mount for a Kahles Helia red dot?
Henneberger ????
- Corjack
- Administrator
- Posts: 10260
- Joined: Thu Jun 11, 2009 2:28 pm
- Location: Missouri
- Location: Booger county Missouri
- Contact:
Re: Best Blaser mount for a Kahles Helia red dot?
I would just take the rings off a standard mount. Drill the appropriate holes, and screw it on. Then when you need to go back to a scope, remove it and reinstall the rings.
- SPEEDY
- Moderator
- Posts: 11305
- Joined: Wed Jul 08, 2009 7:50 am
- Location: Southern highland- Australia
- Location: Albury, NSW, Australia
Re: Best Blaser mount for a Kahles Helia red dot?
I ain't drilling a factory mount, I'd rather get a direct fit on picatinny rail for one, but I don't have any spare mounts atm anyway.
If I can't find a nice factory made one then I won't bother.
If I can't find a nice factory made one then I won't bother.
I'm soft and I don't care.
-
- Meister der jagd
- Posts: 4344
- Joined: Sat Jul 14, 2012 7:53 am
- Location: Melbourne AUSTRALIA
Re: Best Blaser mount for a Kahles Helia red dot?
I thought they were all the same.
https://www.waffen-jaeger.at/optik/zf-m ... -sight?c=0
[BBvideo=560,315]https://www.youtube.com/watch?v=D3sQ2Tgrnso[/BBvideo]
Or what about the Zeiss Z-Point mount??
https://www.waffen-jaeger.at/optik/zf-m ... -point?c=0
https://www.waffen-jaeger.at/optik/zf-m ... -sight?c=0
[BBvideo=560,315]https://www.youtube.com/watch?v=D3sQ2Tgrnso[/BBvideo]
Or what about the Zeiss Z-Point mount??
https://www.waffen-jaeger.at/optik/zf-m ... -point?c=0
- SPEEDY
- Moderator
- Posts: 11305
- Joined: Wed Jul 08, 2009 7:50 am
- Location: Southern highland- Australia
- Location: Albury, NSW, Australia
Re: Best Blaser mount for a Kahles Helia red dot?
From the sounds of that you need an adapter plate to fit a DOCTER mount.
I'm not sure if mine came with one, I'm pretty sure it didn't.
I'm not sure if mine came with one, I'm pretty sure it didn't.
I'm soft and I don't care.
-
- Meister der jagd
- Posts: 4344
- Joined: Sat Jul 14, 2012 7:53 am
- Location: Melbourne AUSTRALIA
- SPEEDY
- Moderator
- Posts: 11305
- Joined: Wed Jul 08, 2009 7:50 am
- Location: Southern highland- Australia
- Location: Albury, NSW, Australia
Re: Best Blaser mount for a Kahles Helia red dot?
New, bought in Australia so who knows, I will look through it all when I get back to Australia.
I'm soft and I don't care.
-
- Meister der jagd
- Posts: 4344
- Joined: Sat Jul 14, 2012 7:53 am
- Location: Melbourne AUSTRALIA