How to Install the Krieghoff Rimfire Einstecklauf into a Drilling
Moderators: Gun Barrel Ecologist, Dom, mchughcb, pagosawingnut
- mchughcb
- Moderator
- Posts: 11147
- Joined: Tue Aug 25, 2009 2:55 am
- Location: Melbourne Australia
How to Install the Krieghoff Rimfire Einstecklauf into a Drilling
I have been meaning to do this for some time. I don't use the 22 Mag barrel much these days but it still shoots straight.
- SPEEDY
- Moderator
- Posts: 11282
- Joined: Wed Jul 08, 2009 7:50 am
- Location: Southern highland- Australia
- Location: Albury, NSW, Australia
Re: How to Install the Krieghoff Rimfire Einstecklauf into a Drilling
I'd love one of those in 22lr, no need for it but they are cool.
I'm soft and I don't care.
- deerhunter338mag
- Global Moderator
- Posts: 9868
- Joined: Fri Jun 12, 2009 12:50 am
- Location: Australia
- Location: Melbourne Australia
Re: How to Install the Krieghoff Rimfire Einstecklauf into a Drilling
So you will be selling your R93 22 barrel then Chucky.
Measure it, when it’s on the deck
- mchughcb
- Moderator
- Posts: 11147
- Joined: Tue Aug 25, 2009 2:55 am
- Location: Melbourne Australia
Re: How to Install the Krieghoff Rimfire Einstecklauf into a Drilling
Good question. It slips nicely into the BBF97 too. When lockdown finishes i might take it to the range and see how it performs in a bergstutzen configuration.
- SPEEDY
- Moderator
- Posts: 11282
- Joined: Wed Jul 08, 2009 7:50 am
- Location: Southern highland- Australia
- Location: Albury, NSW, Australia
Re: How to Install the Krieghoff Rimfire Einstecklauf into a Drilling
Very versatile stalking rifle that way.
I'm soft and I don't care.
- mchughcb
- Moderator
- Posts: 11147
- Joined: Tue Aug 25, 2009 2:55 am
- Location: Melbourne Australia
Re: How to Install the Krieghoff Rimfire Einstecklauf into a Drilling
Also good if you need to pop a cap in the ass of something.
- sav338
- Meister der jagd
- Posts: 2522
- Joined: Fri May 03, 2013 6:25 am
- Location: Australia
- Location: Melbourne
- mchughcb
- Moderator
- Posts: 11147
- Joined: Tue Aug 25, 2009 2:55 am
- Location: Melbourne Australia
-
- Meister der jagd
- Posts: 2303
- Joined: Fri Nov 23, 2012 8:22 pm
- Location: Victoria Australia
Re: How to Install the Krieghoff Rimfire Einstecklauf into a Drilling
That's a very elegant solution to a problem that I don't have.
I recall reading an article somewhere about a European who had one for his BBF. The groups were stupid tiny and he had the thing printing pretty much right on top of his rifle barrel groups.
22 mag is a great choice. Much better than 22LR, although I think I would prefer a Hornet to either of the RFs.
I recall reading an article somewhere about a European who had one for his BBF. The groups were stupid tiny and he had the thing printing pretty much right on top of his rifle barrel groups.
22 mag is a great choice. Much better than 22LR, although I think I would prefer a Hornet to either of the RFs.
- mchughcb
- Moderator
- Posts: 11147
- Joined: Tue Aug 25, 2009 2:55 am
- Location: Melbourne Australia
Re: How to Install the Krieghoff Rimfire Einstecklauf into a Drilling
The rimfire version is easier to install, or remove than the centrefire.
- SPEEDY
- Moderator
- Posts: 11282
- Joined: Wed Jul 08, 2009 7:50 am
- Location: Southern highland- Australia
- Location: Albury, NSW, Australia
Re: How to Install the Krieghoff Rimfire Einstecklauf into a Drilling
I'd go the 22lr, perfect for small game and putting down wounded game, and for anything bigger then that's why you have the actual rifle barrel.secondtry wrote: ↑Tue Oct 20, 2020 4:17 pm That's a very elegant solution to a problem that I don't have.
I recall reading an article somewhere about a European who had one for his BBF. The groups were stupid tiny and he had the thing printing pretty much right on top of his rifle barrel groups.
22 mag is a great choice. Much better than 22LR, although I think I would prefer a Hornet to either of the RFs.
I'm soft and I don't care.
- mchughcb
- Moderator
- Posts: 11147
- Joined: Tue Aug 25, 2009 2:55 am
- Location: Melbourne Australia
Re: How to Install the Krieghoff Rimfire Einstecklauf into a Drilling
I got some packets of 22 mag subs which gives it 22 lr power. Need more? Then you have 2200fps 30gr vmax.
- SPEEDY
- Moderator
- Posts: 11282
- Joined: Wed Jul 08, 2009 7:50 am
- Location: Southern highland- Australia
- Location: Albury, NSW, Australia
Re: How to Install the Krieghoff Rimfire Einstecklauf into a Drilling
That could work too, quite well I'd say.
I'm soft and I don't care.
-
- Meister der jagd
- Posts: 2303
- Joined: Fri Nov 23, 2012 8:22 pm
- Location: Victoria Australia
-
- Posts: 89
- Joined: Fri Feb 26, 2010 11:07 am
- Location: Midland Texas
Re: How to Install the Krieghoff Rimfire Einstecklauf into a Drilling
Good video. Thanks. I have an Einstecklauf (not sure what manufacturer it is right now) in .22 Hornet for my Heym drilling, but haven't had it fitted yet and wasn't sure exactly what needed doing.