Blaserbuds; the worlds superlative information source, for these products

I have a knife with a round edge.. how do i sharpen that one?

Do i cut it back to a V edge or will that fornicate the knife?

HunterAU wrote:I have a knife with a round edge.. how do i sharpen that one?

Do i cut it back to a V edge or will that fornicate the knife?

get a new one easer for you

deerhunter338mag wrote:

HunterAU wrote:I have a knife with a round edge.. how do i sharpen that one?

Do i cut it back to a V edge or will that fornicate the knife?

get a new one easer for you

HunterAU didn´t you lean that when you were a girl guild browine !?

HunterAU wrote:I have a knife with a round edge.. how do i sharpen that one?

Do i cut it back to a V edge or will that fornicate the knife?

For convex (round) edges, I use a leather strop mounted on a board, with compound added. Then I just strop, with little pressure.

Some others use fine grit sandpaper on a computer mousepad. Seems to work, too.

The trick is to strop carefully, and with little pressure, or it screws up the edge.

guns_and_labs wrote:

HunterAU wrote:I have a knife with a round edge.. how do i sharpen that one?

Do i cut it back to a V edge or will that fornicate the knife?

For convex (round) edges, I use a leather strop mounted on a board, with compound added. Then I just strop, with little pressure.

Some others use fine grit sandpaper on a computer mousepad. Seems to work, too.

The trick is to strop carefully, and with little pressure, or it screws up the edge.

Thanks mate you have provided valuable information unlike the two others that placed a comment...!!!

HunterAU wrote: Thanks mate you have provided valuable information unlike the two others that placed a comment...!!!