Specifications for adjustment screws on Blaser scope mounts.
-
- Meister der jagd
- Posts: 622
- Joined: Mon Aug 24, 2009 10:32 pm
- Location: USA
- Location: Tennessee
Specifications for adjustment screws on Blaser scope mounts.
The slotted screws used to adjust the clamp levers on Blaser mounts are too fine for the Blaser screwdriver. I always grind the screwdrivers down to fit. But I'd much rather have a Torx head on the screw. Would anyone have the specifications for the screws? Maybe I could find some. Or maybe someone in Germany could ask Recknagel , who makes the mounts, to furnish replacement screws with Torx heads.
-
- Meister der jagd
- Posts: 1184
- Joined: Mon Jul 14, 2014 10:42 pm
- Location: USA
- Location: Bakersfield, CA
Re: Specifications for adjustment screws on Blaser scope mounts.
INNOMOUNT uses Torx screws in their mounts. I get mine from Titanium GunWorks.
You do not have the required permissions to view the files attached to this post.
I have never met a man so ignorant that I couldn't learn something from him. Galileo
The fact that Jellyfish have survived 650 million years, despite not having brains, gives hope to many people. sun-gazing.com
The fact that Jellyfish have survived 650 million years, despite not having brains, gives hope to many people. sun-gazing.com
-
- Pro Staff
- Posts: 1764
- Joined: Sat Jun 13, 2009 12:54 pm
- Location: 64807
- Location: Dieburg
- Contact:
Re: Specifications for adjustment screws on Blaser scope mounts.
Both Innogun and Henneberger are using Torx screws.
If You have a picture of them disassembled (contact me by email at my website), I could have a look to find those parts for You, but I guess that these are special parts, machined just for Blaser, so no standard screws will work probably.
Innogun
https://www.titanium-gunworks.com/scope ... swarovski/
and
Henneberger:
https://www.titanium-gunworks.com/hms-s ... ovski.html
If You have a picture of them disassembled (contact me by email at my website), I could have a look to find those parts for You, but I guess that these are special parts, machined just for Blaser, so no standard screws will work probably.
Innogun
https://www.titanium-gunworks.com/scope ... swarovski/
and
Henneberger:
https://www.titanium-gunworks.com/hms-s ... ovski.html
life is too short for not having the best equipment You could buy...
http://www.titanium-gunworks.com

http://www.titanium-gunworks.com

-
- Posts: 131
- Joined: Tue Mar 08, 2022 1:15 pm
- Location: United States
Re: Specifications for adjustment screws on Blaser scope mounts.
Titanium ships to the US, correct?