Cartridge .308 win
Brand of bullet Sierra MK
Weight of bullet 168
Brand of brass
Type of powder N 140
Grains of powder 41.5
Brand, and type of primer WLR
COL 72,5 mm
FPS/MPS 772 m"/2533 ft"
Rifle Custom Ruger MV II VT + Lothar Walther honed SS Match bbl.
Scope Leupold Vari- XIII 6,5-20x40 AO
Weather conditions & temp underground
Accuracy @ 100 yards/meters 5 in 0,4 cm at 100 m (.14 MOA)
.308 Win target
Moderator: deerhunter338mag
- André
- Posts: 95
- Joined: Mon Jun 15, 2009 12:49 am
- Location: Belgium
- Location: Brussels
.308 Win target
André
-
- Posts: 409
- Joined: Fri Jun 12, 2009 11:04 pm
- Location: United States of America
- Location: Central Ohio, U.S.A.
- Contact:
Re: .308 Win target
Very nice!
-
- Posts: 447
- Joined: Mon May 05, 2014 5:38 pm
- Location: Eugene OR USA
Re: .308 Win target
Andre:
Impressive. What forend rest and what buttstock rest did you use? What is the diameter of the bullseye ring?
Rick
Impressive. What forend rest and what buttstock rest did you use? What is the diameter of the bullseye ring?
Rick
Paper is my game, steel the same.
- SPEEDY
- Moderator
- Posts: 11282
- Joined: Wed Jul 08, 2009 7:50 am
- Location: Southern highland- Australia
- Location: Albury, NSW, Australia
Re: .308 Win target
I always liked the KM77 mark II VT rifle.
I used one when I was a part time pro too shooter back many moons ago. Sat very stable and that trigger was one of the best to adjust yourself.
I used one when I was a part time pro too shooter back many moons ago. Sat very stable and that trigger was one of the best to adjust yourself.
I'm soft and I don't care.
- André
- Posts: 95
- Joined: Mon Jun 15, 2009 12:49 am
- Location: Belgium
- Location: Brussels
Re: .308 Win target
I'll second that, the 2-stage trigger is very nice for target work. Front rest was Wichita tripod + sand bag at rear end. Target was inspired from bench rest and home drawn using Powerpoint. Being a hunter used to sight in to strike above POA (max point blank range), I'm disturbed by shots hitting below POA, so I turned the target upside down. Aiming square is 2x2 cm (.8x.8") and bullseye's diameter is also 2 cm (.8 "). I'll add that, apart from the match bbl., the rifle was glass bedded by a true artist.
André