T20 Torx. Not a standard head size. I had to turn the diameter down a bit, and domed it. That mated nicely with the socket for the head in the clamp, and left a bit more material for the bit. Tightened nicely with no deformation on the socket like the original. Added some blue Loctite as well.
Getting somewhere with S2 regulation
Moderators: Gun Barrel Ecologist, Dom, mchughcb, pagosawingnut
-
- Posts: 46
- Joined: Fri Nov 20, 2020 6:18 pm
- Location: USA
Re: Getting somewhere with S2 regulation
- mchughcb
- Moderator
- Posts: 11163
- Joined: Tue Aug 25, 2009 2:55 am
- Location: Melbourne Australia
Re: Getting somewhere with S2 regulation
Nice do you have a pic
-
- Posts: 46
- Joined: Fri Nov 20, 2020 6:18 pm
- Location: USA
Re: Getting somewhere with S2 regulation
You do not have the required permissions to view the files attached to this post.
- mchughcb
- Moderator
- Posts: 11163
- Joined: Tue Aug 25, 2009 2:55 am
- Location: Melbourne Australia
Re: Getting somewhere with S2 regulation
Nicely done.
-
- Posts: 46
- Joined: Fri Nov 20, 2020 6:18 pm
- Location: USA
Re: Getting somewhere with S2 regulation
Back to 50 yards. Definitely had early crossover. Dialed the adjustment back out by 3/4 turn. Now both are barrels are printing together when I do my part.
#1:
Was reminded on the second right barrel shot to keep a tight grip. Got my middle finger smacked by the trigger guard. After that reminder I got the groups tightened up.
#2:
Definitely left barrel hitting to right, and right to the left...
#3:
Two flyers, but otherwise four in a hole.
#1:
Was reminded on the second right barrel shot to keep a tight grip. Got my middle finger smacked by the trigger guard. After that reminder I got the groups tightened up.
#2:
Definitely left barrel hitting to right, and right to the left...
#3:
Two flyers, but otherwise four in a hole.
You do not have the required permissions to view the files attached to this post.
- SPEEDY
- Moderator
- Posts: 11302
- Joined: Wed Jul 08, 2009 7:50 am
- Location: Southern highland- Australia
- Location: Albury, NSW, Australia