K95 need a barrel cut and threaded.
Moderators: Gun Barrel Ecologist, Dom, mchughcb, pagosawingnut
-
- Posts: 38
- Joined: Tue Apr 30, 2013 11:01 pm
- Location: SLC
K95 need a barrel cut and threaded.
I have a 308 barrel I need cut and threaded for a suppressor for my kids to shoot. My gunsmith's spindle on his lathe won't clear the barrel lugs/sights etc. Can anyone recommend a smith that can do this for us?
Thanks!
Mac
Thanks!
Mac
- SPEEDY
- Moderator
- Posts: 11302
- Joined: Wed Jul 08, 2009 7:50 am
- Location: Southern highland- Australia
- Location: Albury, NSW, Australia
Re: K95 need a barrel cut and threaded.
I don't suppose his bed is long enough he could do it working between centres?
I'm soft and I don't care.
- jamesc
- Posts: 276
- Joined: Sat Apr 22, 2017 12:24 am
- Location: Orange - NSW Australia
-
- Posts: 38
- Joined: Tue Apr 30, 2013 11:01 pm
- Location: SLC
Re: K95 need a barrel cut and threaded.
Bed length is not the problem. Spindle diameter is the problem with extra girth with the integral lugs and sights on a k95. Yes my smith does not have a big enough lathe for this.
- SPEEDY
- Moderator
- Posts: 11302
- Joined: Wed Jul 08, 2009 7:50 am
- Location: Southern highland- Australia
- Location: Albury, NSW, Australia
Re: K95 need a barrel cut and threaded.
I'm thinking that too actually, if he can't work out removing the sights and putting through the spindle either, he's probably a fairly rough smith to begin with.
Also if it has sights on it already then they will need to be moved. It might be best to send it Blaser USA to get the work done, if nobody can come up with any other options.
I'm soft and I don't care.
-
- Posts: 38
- Joined: Tue Apr 30, 2013 11:01 pm
- Location: SLC
Re: K95 need a barrel cut and threaded.
Thanks for all the worthless replies!
- jamesc
- Posts: 276
- Joined: Sat Apr 22, 2017 12:24 am
- Location: Orange - NSW Australia
-
- Meister der jagd
- Posts: 1117
- Joined: Thu Jan 11, 2018 2:04 pm
- Location: das Heimat
-
- Posts: 38
- Joined: Tue Apr 30, 2013 11:01 pm
- Location: SLC
Re: K95 need a barrel cut and threaded.
Thank You!Gamsjagd wrote: ↑Tue May 04, 2021 6:00 pm My guy does a good job.
Las Cruces Gunsmithing https://lcgnm.com/ used him on many a Blaser barrel.
- SPEEDY
- Moderator
- Posts: 11302
- Joined: Wed Jul 08, 2009 7:50 am
- Location: Southern highland- Australia
- Location: Albury, NSW, Australia
Re: K95 need a barrel cut and threaded.
The trouble I find is that if you can't find a decent Smith around you and you have to send it away, then you might as well send it to the official Blaser Smith.
I just figured if your going to send it away, then send it to the people that know them best.
I just figured if your going to send it away, then send it to the people that know them best.
I'm soft and I don't care.