Thanks Buddy, I was lucky that's for sure. Walk out was a slog no questions there and trying to move the stag on the side of a hill was no fun. But I train for it as its all part of it and you work hard for it. It does make it a little easier, but walking up local hills with a 30kg pack on is one thing, but its not the same as walking up them hill's with 50+kg of Sambar stag in your pack
Elmers Custom R93 338Rum Barrel, Load development
Moderators: deerhunter338mag, stokesrj, trazman
- deerhunter338mag
- Global Moderator
- Posts: 9874
- Joined: Fri Jun 12, 2009 12:50 am
- Location: Australia
- Location: Melbourne Australia
Re: Elmers Custom R93 338Rum Barrel, Load development
Measure it, when it’s on the deck
- deerhunter338mag
- Global Moderator
- Posts: 9874
- Joined: Fri Jun 12, 2009 12:50 am
- Location: Australia
- Location: Melbourne Australia
Re: Elmers Custom R93 338Rum Barrel, Load development
Here is a quick video I forgot I took. Just to give you an Idea how steep it was.
[bbvideo]https://youtu.be/kd3_Le_4jwU[/bbvideo]
[bbvideo]https://youtu.be/kd3_Le_4jwU[/bbvideo]
Measure it, when it’s on the deck
- mchughcb
- Moderator
- Posts: 11163
- Joined: Tue Aug 25, 2009 2:55 am
- Location: Melbourne Australia
Re: Elmers Custom R93 338Rum Barrel, Load development
Thats bloody steep alright
- sav338
- Meister der jagd
- Posts: 2522
- Joined: Fri May 03, 2013 6:25 am
- Location: Australia
- Location: Melbourne
Re: Elmers Custom R93 338Rum Barrel, Load development
Very nice looking stag .
You done extremely well to stop it from rolling down that steep face and to cape it out there.
You done extremely well to stop it from rolling down that steep face and to cape it out there.
- deerhunter338mag
- Global Moderator
- Posts: 9874
- Joined: Fri Jun 12, 2009 12:50 am
- Location: Australia
- Location: Melbourne Australia
Re: Elmers Custom R93 338Rum Barrel, Load development
Thanks Steve, it was hard yakka to cape out and to get the meat off him. I was fighting with 6 or 7 euros at one time, and I kepted flicking small bits of meat 10 yards away so they would move off. Tip of the week, if you haven't yet got a small folding saw, get one. When you can't physically get a good position to twist the head off, the saw works great. I was very lucky to be given a Helium knife off Rob Herbert from R&N Blades Australia a couple of years ago. It cape the whole stag out and cut meat off and my fingers without been shapen. I did buy a second one off him last year and I'm glad I did for a spare. Not sure if I'll use it as he only made 15 of that design.
You do not have the required permissions to view the files attached to this post.
Measure it, when it’s on the deck
-
- Posts: 42
- Joined: Thu Dec 02, 2010 6:02 pm
- Location: Gippsland
- Location: Gippsland, Australia
Re: Elmers Custom R93 338Rum Barrel, Load development
Well Done Brenton nice stag glad it all came together for you.
- deerhunter338mag
- Global Moderator
- Posts: 9874
- Joined: Fri Jun 12, 2009 12:50 am
- Location: Australia
- Location: Melbourne Australia
Re: Elmers Custom R93 338Rum Barrel, Load development
Thanks Scott, It was great that it all came full circle, and what away to do. Time to go look for another one now.sambarhound wrote: ↑Tue Jun 16, 2020 8:13 pm Well Done Brenton nice stag glad it all came together for you.
Measure it, when it’s on the deck
-
- Posts: 49
- Joined: Thu Feb 13, 2020 8:28 pm
- Location: New Zealand
Re: Elmers Custom R93 338Rum Barrel, Load development
Man that drilled him! Looks like a hell of a rig
Do you have any vid of the rifle shooting, I'd love to see what sort of barrel rise you get with the brake.
I shoot a 7-08 mainly because I found years ago a 270wsm without any suppressor or brake was to much rifle for me.
A lot more time behind a rifle since then and some loading experience has me thinking about bigger gear lol
Do you have any vid of the rifle shooting, I'd love to see what sort of barrel rise you get with the brake.
I shoot a 7-08 mainly because I found years ago a 270wsm without any suppressor or brake was to much rifle for me.
A lot more time behind a rifle since then and some loading experience has me thinking about bigger gear lol
- deerhunter338mag
- Global Moderator
- Posts: 9874
- Joined: Fri Jun 12, 2009 12:50 am
- Location: Australia
- Location: Melbourne Australia
Re: Elmers Custom R93 338Rum Barrel, Load development
Here is a quick video before I had the brake fitted and cerakoted. Without the brake it tracks very well and with the brake it's even better. If you don't have a flinching issue, there's nothing like watching your target get hit and everything that happens after the shot.Noswal wrote: ↑Fri Jul 03, 2020 4:55 am Man that drilled him! Looks like a hell of a rig
Do you have any vid of the rifle shooting, I'd love to see what sort of barrel rise you get with the brake.
I shoot a 7-08 mainly because I found years ago a 270wsm without any suppressor or brake was to much rifle for me.
A lot more time behind a rifle since then and some loading experience has me thinking about bigger gear lol
[bbvideo]https://youtu.be/ekGFgaWLxqE[/bbvideo]
Measure it, when it’s on the deck
- deerhunter338mag
- Global Moderator
- Posts: 9874
- Joined: Fri Jun 12, 2009 12:50 am
- Location: Australia
- Location: Melbourne Australia
Re: Elmers Custom R93 338Rum Barrel, Load development
Well it took sometime but with the help of OSA and Safari firearms, I managed to get myself a new R93 ultra mag bolt head. I could only get it in gold but beggars can’t be choosers.
You do not have the required permissions to view the files attached to this post.
Measure it, when it’s on the deck
- deerhunter338mag
- Global Moderator
- Posts: 9874
- Joined: Fri Jun 12, 2009 12:50 am
- Location: Australia
- Location: Melbourne Australia
Re: Elmers Custom R93 338Rum Barrel, Load development
Just checked all the dimensions and the face has been opened a small amount.
You do not have the required permissions to view the files attached to this post.
Measure it, when it’s on the deck
-
- Posts: 352
- Joined: Fri Oct 23, 2015 10:29 pm
- Location: Melbourne AU
Re: Elmers Custom R93 338Rum Barrel, Load development
Thats actually pretty mild looking. You might have said already, but what does the rifle weigh?deerhunter338mag wrote: ↑Fri Jul 03, 2020 6:17 am
Here is a quick video before I had the brake fitted and cerakoted. Without the brake it tracks very well and with the brake it's even better. If you don't have a flinching issue, there's nothing like watching your target get hit and everything that happens after the shot.
[bbvideo]https://youtu.be/ekGFgaWLxqE[/bbvideo]
-
- Posts: 352
- Joined: Fri Oct 23, 2015 10:29 pm
- Location: Melbourne AU
Re: Elmers Custom R93 338Rum Barrel, Load development
Comeon. You can tell us you ordered it in gold. Pimp my rifle.deerhunter338mag wrote: ↑Mon Apr 26, 2021 3:02 am Just checked all the dimensions and the face has been opened a small amount.
A504CC12-F5AA-43D2-A60B-013319B2E30B.jpeg7CC094D7-C775-4EA4-9802-66C5FB3B2224.jpeg
A65D025B-4043-4A23-8D84-8E06784A399B.jpeg
- deerhunter338mag
- Global Moderator
- Posts: 9874
- Joined: Fri Jun 12, 2009 12:50 am
- Location: Australia
- Location: Melbourne Australia
Re: Elmers Custom R93 338Rum Barrel, Load development
Just on 5kg with the NF NXS 22-56zs.Rifletuner wrote: ↑Mon Apr 26, 2021 4:19 pmThats actually pretty mild looking. You might have said already, but what does the rifle weigh?deerhunter338mag wrote: ↑Fri Jul 03, 2020 6:17 am
Here is a quick video before I had the brake fitted and cerakoted. Without the brake it tracks very well and with the brake it's even better. If you don't have a flinching issue, there's nothing like watching your target get hit and everything that happens after the shot.
[bbvideo]https://youtu.be/ekGFgaWLxqE[/bbvideo]
Measure it, when it’s on the deck
- deerhunter338mag
- Global Moderator
- Posts: 9874
- Joined: Fri Jun 12, 2009 12:50 am
- Location: Australia
- Location: Melbourne Australia
Re: Elmers Custom R93 338Rum Barrel, Load development
I only found out it was gold last Wednesday when I got the call from Safari. They said you you don’t want gold we can sell it but it’s very unlikely we will find another one. I said I will take it.Rifletuner wrote: ↑Mon Apr 26, 2021 4:21 pmComeon. You can tell us you ordered it in gold. Pimp my rifle.deerhunter338mag wrote: ↑Mon Apr 26, 2021 3:02 am Just checked all the dimensions and the face has been opened a small amount.
A504CC12-F5AA-43D2-A60B-013319B2E30B.jpeg7CC094D7-C775-4EA4-9802-66C5FB3B2224.jpeg
A65D025B-4043-4A23-8D84-8E06784A399B.jpeg
Measure it, when it’s on the deck